Technical specification

• Splicing method: Core positioning (X/Y).
• Fiber Types: SMF, MMF 50/125µm, 62.5/125µm fiber.
• 250µm primary and 900µm secondary coated fiber.
• Fiber Handling: Fiber holders, 3 pairs (250, 900 and loose tube).
• Optional for any cable-type (drop-cable, 2mm, 3mm,
• Splice on connectors and so on.
• Calibration: Automatic (temperature and air pressure) or manually.
• Splice Programs: 40 groups.
• Operation, modes: Automatic or Manual.
• Typical Splice Loss: 0.02dB SMF, 0.01dB MMF.
• Return loss: >60dB
• Tension test: Yes, 1.8-2.2N.
• Typical Cycle Time: 6s + 25s (splice + oven cycle 40/60mm).
• Sleeve Dimensions Max 64mm length, 2-7mm diameter supported by oven.
• Display: LCD, color, 4.3”.
• Oven: Ceramic/teflon-type. 40/60mm sleeves in about 25 sec.

• Electrodes, life: >4000 splices.
• Magnification Cameras: x250 (X or Y) x125 (X and Y together)
• Communication: USB 2.0 for uploading splice info and upgrade.
• Splice memory: 4000 results internally.
• Altitude Compensation: Automatic up to 4000 meters altitude
• with compensation for moisture and temperature.
• Operating Environment: -10C +50°C, max 95% RH, non-condensing.
• Size: 149x120x127mm.
• Weight: 1.9kg.
• Power Sources: External power supply, 13.5V, 100-240VAC (50-60Hz).
• Built in 5800mAh Li-Ion battery pack.
• Splicing Capacity:200 splices with oven cycles.
• Additional Features: Loss estimation, Fiber fault detection,
• SD-card for logging etc.